3 Series E46 316i (N45) SAL
![background image](/bmw/3_Series_E46/316i_N45_SAL/page-268002.png)
Release nuts of bearing bracket (1).
Remove bearing bracket (1).
Note:
Retaining clips (1) for oil line are fitted on bearing
caps 1 and 4.
Release nuts on bearing caps in 1/2 turn increments from outside
inwards.
RA Removing and installing/replacing inlet camshaft (N40 / N45)
BMW AG - TIS
22.01.2013 07:47
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -