3 Series E46 316i (N45) SAL
Automatic transmission only
Illustration does not show automatic transmission.
Important!
On engines with automatic transmissions, there is shortly
before the special tool bore (1) for the TDC position a large
bore (2) which can be confused with the special tool bore.
If the flywheel is secured in the correct bore (1) with special tool
11 9 190 / 11 5 120 , the engine can no longer be moved at
the central bolt.
Mount special tool 11 9 280 on hub for vibration damper.
Important!
If the central bolt is tightened to the specified torque, special
tool 11 9 190 / 11 5 120 must not be used for gripping
when the central bolt is released.
Pull special tool 11 9 190 / 11 5 120 back until flywheel is no
longer secured.
Do not crank engine.
Note:
When releasing and tightening down central bolt (1), grip special
tool 11 9 280 with a second person.
Slacken central bolt (1) approx. a quarter turn.
Remove special tool 11 9 280 .
RA Replacing timing chain (N40)
BMW AG - TIS
22.01.2013 07:48
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -