3 Series E46 316i (N45) SAL
![background image](/bmw/3_Series_E46/316i_N45_SAL/page-269011.png)
Install both solenoid valves.
Install upper screw of chain guide (1) and fit without play.
Install lower screw of chain guide and tighten down.
Tighten down upper screw of chain guide (1).
Replace sealing ring on plug.
Insert plug and tighten down.
Tightening torque 25 Nm.
RA Replacing timing chain (N40)
BMW AG - TIS
22.01.2013 07:48
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 11 -