3 Series E46 316i (N45) SAL
11 40 000
Checking engine oil pressure
(N40/N42/N45/N46)
Special tools required:
•
11 9 240
•
11 9 250
•
13 3 061
•
13 3 063
Note:
When the main flow oil-filter cover is released, the oil flows from
the oil-filter housing back into the sump.
Release oil filter cap with special tool 11 9 240 .
Check sealing rings (1 to 3), replace if necessary.
Insert oil filter element (4) in special tool
11 9 250 .
Insert special tool 11 9 250 and tighten down.
Tightening torque 11 42 2AZ .
RA Checking engine oil pressure (N40/N42/N45/N46)
BMW AG - TIS
22.01.2013 07:51
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -