3 Series E46 316i (N45) SAL
86 10 ...
Disassembly of base plate
Note:
Disassembly of bar
refer to 86 10 ... Replacing bar
Disassembly of lashing plate
refer to 86 10 ... Replacing lashing plate and lashing eye
Disassembly of 12 volt socket
refer to 86 10 ... Replacing 12 volt socket
Remove plastic bush/metal bush
refer to 86 10 ... Removing plastic bush/metal bush
Disassembly of light guard
refer to 86 10 ... Replacing rear light
Disassembly of front apron
refer to 86 10 ... Disassembly of front apron
Disassembly of left and right aprons
refer to 86 10 ... Disassembly of left and right aprons
Disassembly of left and right wheel boxes
refer to 86 10 ... Disassembly of left and right wheel boxes
Disassembly of rear apron
refer to 86 10 ... Disassembly of rear apron
Disassembly of left and right lamp housings
refer to 86 10 ... Disassembly of left and right lamp housings
Disassembly of rivet connection, rear support
refer to 86 10 ... Disassembly procedure of rivet connection,
rear support
Unscrew bolts (1).
Caution!
Before drilling out rivet heads, drive in rivet pins with a punch.
Drill out rivet connections (2).
Installation:
Tightening Torque,
refer to Technical Data 86 10 32AZ.
RA Disassembly of base plate
BMW AG - TIS
22.01.2013 14:36
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -