3 Series E46 316i (N45) SAL
86 21 ...
Replacing inside light power cable
Note:
Remove inside light cover and lamp housing,
refer to 86 21 ... Replacing inside light.
Remove inside light plug,
refer to 86 21 ... Removing inside light plug.
Carefully remove adhesive bonds of power cable (1) from hood
surface.
Installation:
Carefully remove traces of old adhesive with a scraper. Use
standard heat gun adhesive as adhesive.
Carefully remove adhesive bonds of power cable (1) from hood
surface.
Installation:
Carefully remove traces of old adhesive with a scraper. Use
standard heat gun adhesive as adhesive.
Remove flat connectors (1). Strip cable ends (2) and connect to
a new cable. Feed cable connection through opening (3).
RA Replacing inside light power cable
BMW AG - TIS
22.01.2013 14:56
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -