3 Series E46 316ti (N45) COMP
11 33 050
Removing and installing / replacing all rocker
arms (N40 / N45)
Necessary preliminary tasks:
•
Remove cylinder head.
•
Remove inlet and exhaust adjustment unit.
•
Remove inlet camshaft.
•
Remove exhaust camshaft.
Important!
Used rocker arms (1) may only be reused in the same
position.
Note:
Rocker arms (1) of exhaust camshaft are of same design as
rocker arms of inlet camshaft.
Installation:
As of 7/04 the cast rocker arm is replaced by the sheet metal
rocker arm (1).
Replacement procedure N40:
2a
for classes 3 and 4 cast rocker arm
2b
for classes 1 and 2 cast rocker arm
N45:
Classification (1, 2A, 2B, 3).
Assemble engine.
RA Removing and installing / replacing all rocker arms (N40 / N45)
BMW AG - TIS
26.01.2013 14:21
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
