3 Series E46 316ti (N45) COMP
Note:
Cutout on cover must be sealed against fraying. Sealing is carried
out with a commercially available hot cutter (1) with replaceable
blades (2).
Warning!
Handle the hot cutting equipment with care - risk of injury.
Do not inhale fumes.
When working indoors:
Ensure room is well ventilated.
Remove the fumes generated during cutting with a fume
extraction facility.
General information:
Further safety precautions,
refer to operating instructions for hot-cutting equipment.
Seal cutout (2) against fraying with blade (1) of hot cutter.
Caution!
The dia. must not be greater than measurement (d) after
sealing.
d
=
46
mm
RA Replacing left or right rear side trim panel (compact)
BMW AG - TIS
26.01.2013 19:25
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -