3 Series E46 316ti (N45) COMP
51 71 407
Replacing rear spoiler (compact)
Special tools required:
•
00 9 312
•
00 9 318
Note:
Minimum object temperature of rear spoiler and body
≥
18
°
C.
If this temperature is not achieved, the components must be
preheated.
Note:
Special tool 00 9 312 is required for measurement.
Position of special tool 00 9 312 for measurement:
-
measure at rear lid (1)
-
at end of rear lid radius (3)
-
at straight surface (A)
-
in straight line (2) to edge (4)
Measure and note down dimensions of old rear spoiler:
Stick on an adhesive tape (1) externally in each case. Mark a
stroke at distance (A) outside of rear lid edge at right angle.
Measure distance (B) as follows:
From front/outer corner (2) of special tool 00 9 312 to rear
spoiler (3) at distance (A).
Rear spoiler (3) is centered with respect to rear lid on sides.
Specified dimensions for compact:
A
5 mm
B
48 mm
RA Replacing rear spoiler (compact)
BMW AG - TIS
26.01.2013 19:42
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -