3 Series E46 318Ci (N46) CONVER
Bearing caps of exhaust camshaft are marked A1 to A4 from inlet
side.
Lubricate exhaust camshaft and bearing caps with engine oil.
Fit bearing caps of exhaust camshaft.
Note:
Retaining clips (1) for oil line are fitted on bearing
caps 1 and 4.
Insert all nuts and install without play.
Tighten down nuts on bearing caps in 1/2 turn increments from
inside outwards.
Tightening torque, 11 31 1AZ
.
Fit bearing bracket (1).
RA Removing and installing/replacing exhaust camshaft (N40 / N45)
BMW AG - TIS
06.02.2013 03:18
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -
