3 Series E46 318Ci (N46) CONVER
51 16 340
Removing and installing/replacing lock for
right glovebox
Release screws (1).
All models except Convertible:
Remove upper section (2) and lower section of lock.
Remove lower section of lock.
Convertible with servodrive on upper section of lock (2) only:
If necessary, disconnect plug connection on upper section of lock
(2).
Remove upper section (2) and lower section of lock.
Convertible with servodrive on glovebox carrier only:
Unlock catches (1) and lever out microswitch (2).
Remove lower section of lock (3).
Convertible with servodrive on upper section of lock only:
Disconnect plug connection and remove upper section of lock (3).
Replacement only, all models except Convertible:
Insert vehicle key in lock cylinder (2).
Break open locks (1) if necessary and pull out lock cylinder (2)
with vehicle key.
Replacement only, Convertible:
Insert vehicle key (1) in lock cylinder.
Release control cap (2) with screwdriver from lock (3).
RA Removing and installing/replacing lock for right glovebox
BMW AG - TIS
06.02.2013 10:39
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
