bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

6 RA Removing And Installing_replacing Rear Window For Hard Top|Page 2130 > < 5 RA Removing And Installing_replacing Rubber Frame For Windshield (top_side)
Page 1
background image

51 31 255

Removing and installing/replacing rear
window for hard top

Special tools required:

00 9 322

51 0 010

51 3 010

Important!

Instructions for window cementing are an essential part of
these repair instructions and must be followed without fail.

When reusing the rear window:

Avoid damaging lines for rear window heating/antenna.

Note:

Removal is performed with Roll Out 2000

. Only use an

oscillating blade when replacing the windscreen.

Necessary preliminary tasks:

Remove hard top

Remove moulded roofliner trim (C-pillar) on left/right

Remove rear window frame panel

Remove seal for hard top rear window

Disconnect plug connection (1) on left/right and secure line (2)
with adhesive tape to rear window.

RA  Removing and installing/replacing rear window for hard top

BMW AG - TIS

06.02.2013  11:07

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

6 RA Removing And Installing_replacing Rear Window For Hard Top|Page 2130 > < 5 RA Removing And Installing_replacing Rubber Frame For Windshield (top_side)