3 Series E46 318Ci (N46) CONVER
65 75 573
Removing and installing/replacing module for
passenger compartment sensor (rear)
Special tools required:
•
00 9 317
Release center console in rear area.
Lift center console (1) slightly and feed housing (2) in direction
of arrow out of guides.
Installation:
Make sure housing (2) is correctly seated in guides.
Press module for passenger compartment sensor (1) in direction
of arrow as far as it will go into housing (2).
Disconnect plug connection (3) and remove housing (2) with
module for passenger compartment sensor.
RA Removing and installing/replacing module for passenger compartment sensor (rear)
BMW AG - TIS
06.02.2013 20:03
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -