3 Series E46 318Ci (N46) CONVER
Installation:
Turn relevant drive shaft (1) to open convertible top lock (2)
completely to outer side of car.
Pull out wiring harness (1) in direction of arrow.
Installation:
Ensure wiring harness (1) is laid correctly.
Turn plug connections (2) completely in direction of arrow and
unclip from fixture (3).
Unlock plug connections (2) and disconnect.
Unlock plug housing (3) and disconnect in direction of arrow from
plug housing (4).
Release nuts (1) and remove drive for convertible top lock (2).
Tightening torque 54 34 1AZ
.
Installation:
Screws for nuts (1) are microencapsulated.
RA Removing and installing/replacing drive for convertible top lock
BMW AG - TIS
06.02.2013 20:24
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
