3 Series E46 318Ci (N46) CONVER
72 11 108
Removing and installing or replacing all rear
seat belts (compl., with inertia reel belt)
(convertible)
Remove and install backrest.
Remove and install rear head restraints.
Unclip complete left and right covers (1).
Unfasten left and right screw.
Installation:
Coding of end fitting (lug) must run into hole in body.
Tightening torque 72 11 9AZ.
RA Removing and installing or replacing all rear seat belts (compl., with inertia r
BMW AG - TIS
06.02.2013 20:39
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -