3 Series E46 318i (M43TU) SAL
Remove heat shield (1).
Release screws.
Tightening torque, 26 11 1AZ.
Installation:
Replace self-locking nuts.
Grip propeller shaft.
Release nuts.
Tightening torque, 26 11 6AZ.
Bend propeller shaft downwards at center mount (1). Detach
propeller shaft from transmission output flange and tie back to
side on vehicle underbody.
Grip output flange (1) with special tool 23 0 020 .
Release hexagon nut.
Tightening torque, 24 21 1AZ.
Installation:
Install hexagon nut with screw retaining compound.
RA Replacing output flange (A4S 200R)
BMW AG - TIS
11.02.2013 18:41
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -