3 Series E46 318i (M43TU) TOUR
11 00 050
Removing and installing engine (M43TU)
Follow instructions for disconnecting and connecting
battery,
refer to general information in MG12.
Disconnect negative battery lead.
Remove microfilter.
Open cable duct on lower section of microfilter housing (2) and
feed out cable(s).
Release screws (1) and remove lower section of microfilter
housing (2).
Remove intake filter housing,
refer to 13 71 000.
Remove Bowden cable for throttle actuation from throttle body.
Remove ignition coil.
Remove air pump.
Remove radiator,
refer to 17 11 000.
RA Removing and installing engine (M43TU)
BMW AG - TIS
11.02.2013 13:27
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -