3 Series E46 318i (M43TU) TOUR
Caution!
Open-end wrench can slip off tensioning rail.
Slowly and carefully push back tensioning rail with open-end
wrench, fit chain wheel with chain.
Note:
Arrow on chain wheel in cylinder axis points upwards; align
elongated holes in center.
Fit sensor gear, arrow (1) on sensor gear points upwards in
cylinder axis.
Insert screws, secure chain wheel to camshaft.
Tightening Torque,
refer to Technical Data 11 31 3AZ.
Remove special tools 11 2 300 and 11 3 190.
If necessary, check timing diagram,
refer to 11 31 005.
Assemble engine.
RA Replacing timing chain (M43TU)
BMW AG - TIS
11.02.2013 14:00
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -