3 Series E46 318i (M43TU) TOUR
Replace fan cowl.
Release screws (1) for clock regulator, release screws (2) for
engine. Pull cable from retainers. Unlock plug (3) and remove
from retainer.
Observe Tightening Torque,
refer to 17 40 1AZ, 17 40 2AZ
Note:
Fan is balanced; do not under any circumstances carry fan by fan
impeller.
Failure to comply with this instruction may result in imbalance and
thus fan noise or obstruction.
RA Replacing fan cowl (M43TU/M52TU without A/C system)
BMW AG - TIS
11.02.2013 15:34
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -