3 Series E46 318i (M43TU) TOUR
Engine M52:
Remove adjusting screw (1) from mount.
Unhook nipple from actuating lever (2).
Note:
Intake pipe was removed for demonstration purposes.
Unhook nipple (3) from accelerator pedal.
Press together retaining hooks on penetration (1) and remove
throttle cable from engine firewall (2).
Remove throttle cable with penetration (1) and rubber grommet
(2).
Installation:
Opening of penetration (1) must rest in lug (3) of engine
firewall. Check by pulling whether retaining hooks are
snapped into place. Attach rubber grommet (2).
RA Replacing Bowden cable for throttle valve actuation
BMW AG - TIS
11.02.2013 20:18
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -