3 Series E46 318i (M43TU) TOUR
Clean reinforcement plates and connection points on car and coat
with zinc dust paint.
Insert reinforcement plates on center of B-pillar at 1/2 length,
secure in position and weld up.
Insert reinforcement plates on outside of B-pillar at 1/2 length,
secure in position and weld up.
Grind welding spots until smooth.
Make reinforcement plates for cover for side member for
connection point
door pillar (A-pillar) and
C-pillar
from remaining metal sheet.
Width of reinforcement plates: approx. 60 mm.
RA Replacing cover for side member, left or right (partial replacement, B-pillar be
BMW AG - TIS
11.02.2013 21:14
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 8 -
