3 Series E46 318i (M43TU) TOUR
Note:
If the vertical adjustment of the rear lid is altered, it is
absolutely essential to adjust the rear window as well.
The position of the rear lid and rear window hinge shafts to
each other changes when the vertical adjustment is corrected
and the rear window may be subjected to tension when it is
closed!
This will result in poor closing and opening comfort.
Height adjustment:
Close trunk lid carefully.
Slacken screw of hinge bracket for rear lid on rear lid hinge on left
and right so that rear lid can be moved.
Vertical adjustment is conducted at middle of elongated hole.
Measurement (A) = uniform distance.
Measurement (B) = uniform distance.
Note:
For purposes of clarity, screw is shown removed.
Tighten screw back down.
Tightening torque,
refer to Technical Data 41 62 2AZ.
Gap adjustment and longitudinal adjustment:
Rear lid closed.
Slacken screws of hinge bracket for rear lid on rear lid on left and
right so that rear lid can be moved.
Adjust gap dimensions and position of rear lid relative to the other
attachments on the body,
refer to 41 00.
Tighten down screws of hinge bracket again.
Tightening torque,
refer to Technical Data 41 62 1AZ.
RA Adjusting trunk lid to fit (touring)
BMW AG - TIS
11.02.2013 21:53
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -
