3 Series E46 318i (M43TU) TOUR
51 11 000
Removing and installing complete front
bumper (up to 9/01)
Unfasten left/right screws (1).
Release screw (1) on left/right and lift out wheel arch finishers (2)
on side.
Release screws (1) on impact absorber on left/right.
Installation:
Tightening Torque,
refer to Technical Data 51 11 2AZ.
Pull out bumper a little
and disconnect plug connection (1) of air horn on left/right.
Version with fog lamps:
Disconnect plug connection (2) of fog lamps on left/right.
Remove bumper (3).
RA Removing and installing complete front bumper (up to 9/01)
BMW AG - TIS
11.02.2013 21:59
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
