3 Series E46 318i (M43TU) TOUR
51 49 007
Removing and installing/replacing all trims
for rear lid (Touring)
For removal purposes, the trim panel wedge (special
tool 00 9 317) must be present twice.
Without the trim panel wedge, the sprayed links (clips) on
the trims will be damaged.
Damaged trims must be replaced.
Overview "Set of plastic wedges" (special tool 00 9 310):
1.
00 9 311 Trim remover
2.
00 9 312 Striking wedge, square
3.
00 9 313 Striking wedge, large
4.
00 9 314 Adjustment wedges (2 x)
5.
00 9 315 Gap wedge
6.
00 9 316 Sealing lip wedge
7.
00 9 317 Trim panel wedge is needed twice for this work
8.
00 9 318 Universal wedge
9.
00 9 319 Striking wedge, small
10. 00 9 321 Fishbone
11. 00 9 322 Plastic wedge
12. 00 9 323 Cleaning wedge (scraper)
(A) Trim on rear lid, top center:
First lever out center clip (1) with two special tools 00 9 317.
Lever out outer clips (2).
Feed trim (3) out of swallow-tail guides of side trims (4).
Installation:
If necessary, replace faulty connector inserts (1).
RA Removing and installing/replacing all trims for rear lid (Touring)
BMW AG - TIS
12.02.2013 01:24
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
