bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

4 RA Removing And Installing _ Replacing CD-changer > < 2 RA Removing And Installing_replacing Radio Control Panel (radio Navigation)
Page 1
background image

65 11 055

Removing and installing/replacing radio
receiver (radio navigation or on-board
monitor) (Touring)

Release trim panel for luggage compartment floor at front,

refer to 51 47 131.

Note:

For purposes of clarity:

Illustration shows trunk floor removed.

Pull out clip on wiring harness.

Unfasten plug connection (1).

Disconnect antenna plug (3).

Unfasten nut (2).

Raise radio receiver and pull out.

Replacement:

Remove retainer (4).

Installation:

If necessary, replace rubber guides.

If necessary, replace clip on wiring harness.

RA  Removing and installing/replacing radio receiver (radio navigation or on-board m

BMW AG - TIS

12.02.2013  05:05

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

4 RA Removing And Installing _ Replacing CD-changer > < 2 RA Removing And Installing_replacing Radio Control Panel (radio Navigation)