3 Series E46 318i (M43TU) TOUR
72 11 103
Removing and installing / replacing rear
center safety belt
Partially remove backrest cover,
Refer to Replacing backrest cover for rear seat (through-
loading system) on left,
refer to 52 26 411.
Release screw.
Remove rear right lower strap (2) and middle lower strap (1).
Note:
The "CENTER" marking is located on the red release button
on the buckle of the lower strap in the middle!
Installation:
Fittings of rear right lower strap (4) and middle lower strap (3)
must rest against stop (1).
Installation position:
Rear right lower strap (4) is shorter and lies underneath
middle lower strap (3), which is longer.
Retaining screw (2) for rear right and middle lower straps.
Tightening Torque,
refer to Technical Data 72 11 1AZ
RA Removing and installing / replacing rear center safety belt
BMW AG - TIS
12.02.2013 05:58
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
