3 Series E46 318i (N42) SAL
Installation:
Check adapter sleeve (1) for damage and correct installation
position.
Note:
Bore hole (2) is considerably smaller and is "not" designed to
accommodate adapter sleeve.
Installation:
Position of adapter sleeve is identified by a notch in flywheel.
Installation:
Replace screws.
Tightening torque 11 22 2AZ
.
RA Removing and installing or replacing flywheel (N40/N42/N45/N46)
BMW AG - TIS
11.02.2013 13:52
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -