3 Series E46 318td (M47TU) COMP
Unfasten rotary connection with special tool 16 1 020.
Installation:
Replace rubber seal; in so doing, always insert rubber seal in
tank.
Tighten down rotary connection to correct torque.
Tightening torque, refer to 16 14 2AZ.
Installation:
When installing the fuel level sensor, ensure the lug (1)
locates in the recess (2) on the tank.
When tightening to torque, notch (3) on screw cap can be
heard and felt to engage in the toothed segment (4) on the
tank.
RA Removing and installing/replacing fuel level sensor (right) (complete unit)
BMW AG - TIS
11.02.2013 17:48
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
