3 Series E46 318ti (N42) COMP
Insert screws and tighten down eccentric shaft sensor (1).
Clamp special tool 11 9 320 as illustrated in a vise.
Deposit bearing bracket (1) with eccentric shaft downwards in
special tool 11 9 320 .
Install inlet camshaft.
Assemble engine.
RA Removing and installing / replacing eccentric shaft (N42 / N46)
BMW AG - TIS
12.02.2013 01:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 7 -