3 Series E46 318ti (N42) COMP
If necessary, remove engine underguard at front.
Grip adjusting screw (2) and undo drain plug (1) on radiator at
bottom.
Drain, catch and dispose off coolant.
Installation:
Replace sealing ring.
Tightening torque 17 11 2AZ
.
Open drain plug (1) on engine block.
Drain, catch and dispose off coolant.
Installation:
Replace sealing ring.
Tightening torque 11 11 5AZ
.
Adding coolant:
Open vent screw (1).
Open vent screw (1).
RA Draining and adding coolant (N42 / N40 / N45 / N46)
BMW AG - TIS
12.02.2013 03:06
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -