3 Series E46 318ti (N42) COMP
18 32 005
Removing and installing/replacing catalytic
exhaust-gas converter (N40,N42,N45,N46)
Special tools required:
•
00 2 210
Warning!
Scalding hazard!
Only perform these tasks after exhaust system has cooled
down.
Remove and install complete exhaust system.
Place new catalytic converter which is firmly connected to center
muffler on exhaust system to be replaced and mark cutting line.
Cut exhaust pipe with special tool 00 2 210 at marked points
and deburr.
RA Removing and installing/replacing catalytic exhaust-gas converter (N40,N42,N45,N
BMW AG - TIS
12.02.2013 03:21
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -