3 Series E46 318ti (N42) COMP
51 13 280
Removing and installing trim molding on roof
frame on left or right (compact)
Special tools required:
•
00 9 321
Lever out trim molding (1) with special tool 00 9 321 at rear and
unclip remainder.
Installation:
If necessary, replace faulty clips (1) or seals (4) of trim
molding (3). Ensure retainer (2) is firmly seated at ends of trim
molding (3).
Installation:
Trim molding (1):
-
Push in at front into seal (2)
-
Clip in at front and rear until flush with edge (3)
-
Then clip in remainder
RA Removing and installing trim molding on roof frame on left or right (compact)
BMW AG - TIS
12.02.2013 08:55
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -