3 Series E46 318ti (N42) COMP
Installation:
Align retainers (1) of trim molding (2) to holders (3) on roof.
Installation:
Push steel pin (1) into cover (2) on one side until flush.
Installation:
Insert cover (1) in trim molding (2) and push in steel pin (3) in
middle.
Installation:
Pay attention to installation position of plastic unit (1).
Clip plastic unit (1) into trim molding (3). Steel pin (4) must be
located between retainers (2) of plastic unit (1).
RA Replacing trim molding on roof frame on left or right (compact)
BMW AG - TIS
12.02.2013 08:56
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -