3 Series E46 318ti (N42) COMP
51 13 402
Removing and installing handle strip (on rear
lid) (compact)
Remove panel for rear lid.
Feed out wiring harness (1) from bracket (2).
Disconnect plug connection (3).
Release screws (1) and withdraw handle strip (2).
Installation:
Tightening torque, 51 13 4AZ
.
Check function.
RA Removing and installing handle strip (on rear lid) (compact)
BMW AG - TIS
12.02.2013 08:57
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -