3 Series E46 318ti (N42) COMP
Screw threaded pin (1) into threaded plate of striker (2).
Release screw (3).
Remove striker (2) from rear lid panel (4).
Threaded pin (1) remains in threaded plate (2) until striker is fitted.
Caution!
Do not close rear lid - risk of damage.
Installation:
Adjust striker for lower rear lid lock section.
Caution!
Striker and rear lid lock must not be greased.
RA Removing and installing/replacing striker for rear lid lock (compact)
BMW AG - TIS
12.02.2013 09:40
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -