3 Series E46 320Cd (M47TU) COUPE
11 13 000
Removing and installing, sealing or replacing
oil sump (M47TU)
Special tools required:
•
00 0 200
•
00 0 201
•
00 0 202
•
00 0 204
•
00 0 208
Note:
To remove oil sump:
Lower front axle support.
There is no need to perform a front axle alignment check.
Remove engine underguard.
Caution!
When working on the oil, coolant or fuel circuit, you must
protect the alternator against contamination.
Cover alternator with suitable materials.
Failure to comply with this procedure may result in an alternator
malfunction.
Drain engine oil.
RA Removing and installing, sealing or replacing oil sump (M47TU)
BMW AG - TIS
12.02.2013 11:52
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -