3 Series E46 320Cd (M47TU) COUPE
Fit timing-chain cover.
Insert all screws and initially tighten to approx. 5 Nm.
Fully tighten all screws in alternate sequence.
Note:
M7 screws.
Tightening torque 11 14 1AZ
.
Important!
Once all screws have been tightened down, retighten them in
a second operation.
Replace radial sealing ring.
Assemble engine.
RA Removing and installing, sealing/replacing timing case cover at bottom (M47TU /
BMW AG - TIS
12.02.2013 11:53
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -