3 Series E46 320Cd (M47TU) COUPE
Release self-locking nut (1).
Installation:
Replace self-locking nut.
Withdraw tensioning roller with lever (1) in direction of arrow.
Loosen screws (1).
Remove belt tensioner (2).
Installation:
Opening on housing of belt tensioner (2) must be turned to
alternator.
Align belt tensioner, insert screws (1) but do not tighten
down. Install tensioning roller with lever and then tighten down
screws (1).
RA Removing and installing alternator drive belt (M57 / M47TU)
BMW AG - TIS
12.02.2013 12:03
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -