3 Series E46 320Cd (M47TU) COUPE
Replace fan cowl.
Release screws (1) for clock regulator, release screws (2) for
engine. Pull cable from retainers. Unlock plug (3) and remove
from retainer.
Observe Tightening Torque,
refer to 17 40 1AZ, 17 40 2AZ
Note:
Fan is balanced; do not under any circumstances carry fan by
fan impeller.
Failure to comply with this instruction may result in imbalance
and thus fan noise or obstruction.
M47 and M47TU with automatic transmission:
Lever out expansion rivets (1).
Press intake hood (2) towards rear and raise a little.
Pull intake hood (2) out of gaiter (3).
Unlock plug connection (1) and disconnect.
Detach plug from AUC sensor.
Release screw (1).
RA Replacing fan cowl (M47 / M47TU)
BMW AG - TIS
12.02.2013 13:28
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
