3 Series E46 320Cd (M47TU) COUPE
Unfasten screws.
Tightening torque, 24 71 1AZ/2AZ .
Unclip cable from cross-member.
Remove cross-member (1)
Unfasten screws.
Tightening torque, 26 11 1AZ .
Installation:
Replace self-locking nuts.
Grip propeller shaft.
Unscrew nuts.
Tightening torque 26 11 6AZ .
Bend propeller shaft downwards at center bearing (1).
Detach propeller shaft from transmission output flange and tie
back to side on vehicle underbody.
Lower transmission until cylinder head touches bulkhead.
Suspend special tool 11 8 022 from left and right control arms.
Important!
Position special tool 11 8 022 in such a way that engine oil
sump rests safely on special tool.
Tighten down knurled screws until special tool 11 8 022 rests on
engine oil sump.
RA Removing and installing automatic transmission (A5S 390R, M47TU)
BMW AG - TIS
12.02.2013 14:04
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -