3 Series E46 320Cd (M47TU) COUPE
41 11 029
Replacing right engine support (partial
replacement in front of front axle) (E46)
Instructions on body repair,
refer to 41 00
Place vehicle on straightening bench.
Remove or disconnect following parts:
-
Cover in wheel arch
-
Complete bumper
-
Front wall
-
Radiator assembly
-
Container for windscreen wash unit
Other vehicle parts located in the repair zone or subject to be
damaged from heat, sparks or dust, must be removed or covered.
Mark cutting line and cut off engine carrier.
Cutting line is located in center of oval bore.
Length (A) of oval bore: 15 mm
Height (B) of oval bore: 12 mm
Cut off new engine carrier to match cut on car and fit in.
Clean mating surfaces and drill holes for plug welding.
RA Replacing right engine support (partial replacement in front of front axle) (E46
BMW AG - TIS
12.02.2013 18:06
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -