3 Series E46 320Cd (M47TU) COUPE
Determine and mark out cutting lines for side window (1) and side
frame (2).
Measurement (A) = 445 mm from edge of side window.
Measurement (B) = 220 mm from edge of cutout for inertia reel
unit.
Determine location and mark cutting line on C-pillar.
Measurement (A) = 565 mm from upper edge of side window.
Determine location and mark cutting line on C-pillar.
Measurement (A) = 220 mm from roof edge.
Further option for determining cutting line for C-pillar:
Determine cutting line for C-pillar from interior and mark out.
Measurement (A) = 75 mm from end of slot (1) in flange of rear
window frame.
RA Replacing rear left or right outer wheel arch section (side panel removed) (E46
BMW AG - TIS
12.02.2013 18:12
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -