3 Series E46 320Cd (M47TU) COUPE
Note:
After detaching hose, seal off pump outlet and hoses.
Remove hose (1).
Disconnect plug connections (3).
Version with headlight cleaning system:
Unlock hose (2) and detach.
Remove filler hose (1) from washer fluid reservoir (2).
Installation:
If necessary, replace faulty O-ring (3).
Remove center section of bumper (carrier).
Installation:
Distance (A) must be the same all around between the bumper
and body cutout.
Measurement (A) = 5
±
1 mm
Release screws (1).
Remove washer fluid reservoir (2).
RA Removing and installing/replacing carrier for front bumper trim (M3 / lightweigh
BMW AG - TIS
12.02.2013 18:39
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -