3 Series E46 320Cd (M47TU) COUPE
51 15 330
Removing and installing/replacing body
molding on left or right front door (Coupé)
Note:
To prevent ends of molding from bending:
Using two special tools 00 9 317 (trim panel wedge), unclip
clips (2) of molding (1).
If necessary, lever out clips in front door.
Installation:
If necessary, replace faulty rubber grommets (1) and
clips (2).
Prior to installation, coat rubber grommets (1) with soapy
solution (washing-up liquid).
Snap clips with rubber grommet into molding (3) and align.
Clip molding (3) into door.
RA Removing and installing/replacing body molding on left or right front door (Coup
BMW AG - TIS
12.02.2013 18:58
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -