3 Series E46 320Cd (M47TU) COUPE
63 12 895
Replacing drive for left adaptive directional
headlight
Warning!
Version with xenon headlights: Danger to life due to high
voltage! Therefore disconnect all components from voltage
supply before removal.
Work on the entire xenon lighting system (ignition unit, control
unit and lamp) may only be carried out by specialist
personnel.
Necessary preliminary tasks:
•
Remove left headlight.
Release screws (1).
Remove drive for adaptive directional headlight (2) in direction of
arrow from headlight (3).
Installation:
Fit drive for adaptive directional headlight (1) exactly on
headlight.
Make sure pin housing (2) is correctly seated in plug
housing (3).
RA Replacing drive for left adaptive directional headlight
BMW AG - TIS
12.02.2013 22:18
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
