3 Series E46 320Cd (M47TU) COUPE
65 77 016
Removing and installing airbag control unit
Warning!
Note airbag safety instructions!
Incorrect handling can activate airbag and cause injury.
Necessary preliminary tasks:
•
Remove storage compartment
•
Disconnect battery negative lead
Cut carpet (1) along premarked line and fold back.
Installation:
Secure carpet (1) to position (2) using cable strap.
Release nuts (2), tightening torque 65 77 1AZ
.
Raise airbag control unit.
Installation:
Before installing airbag control unit, make sure earth/ground cable
is resting on stud bolt (1).
RA Removing and installing airbag control unit
BMW AG - TIS
12.02.2013 23:39
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -