3 Series E46 320Ci (M54) CONVER
Release nut (1) and disconnect battery positive leads from starter
motor.
Installation:
Tightening torque, 12 41 4AZ
.
Release nuts (1).
Installation:
Tightening torque, 12 41 4AZ
.
Remove lines (2) from starter motor.
Release both starter motor mounting bolts (1) on transmission:
Release starter mounting bolts from transmission output end with
a long extension and a universal joint.
Installation:
Tightening torque, 12 41 1AZ
.
Withdraw starter motor (1) from transmission flange and remove
towards bottom.
RA Removing and installing/replacing starter motor (M54 / M56)
BMW AG - TIS
12.02.2013 14:01
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -