3 Series E46 320Ci (M54) CONVER
Adjust inner B-pillar (3) to fit.
Weld areas (1) (weld seams or plug/spot welds).
Spot-weld areas (2).
Plug/spot-weld area (1).
Mark section of new partial section part (entrance) after previous
severance cuts (1) and cut.
In areas (2) and (3), drill holes at spacing of 25 mm for plug/spot-
welding. The plug/spot welds renew the laser weld seams.
RA Replacing rear left side wall with inner side frame
BMW AG - TIS
12.02.2013 20:31
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 9 -
