3 Series E46 320Ci (M54) CONVER
54 21 045
Removing and installing/replacing fastener
for hard top at rear/side left or right
Necessary preliminary tasks:
•
Remove hard top
•
Remove trim-molded roof lining (C-pillar trim)
Disconnect plug connection (1) and if necessary push off
retainer.
Unclip cable (2).
Removing fastener:
-
Turn locking lever (1) to rear (close)
-
Release screw (2)
-
Detach locking lever (1) and detent disc (3) towards top
-
Release nut (4)
-
Remove nut with fastening plate (5) towards top
-
Feed out fastener (6) towards bottom
Installation:
Tightening torque:
Screw (2)
54 21 3AZ
Nut (4)
54 21 2AZ
RA Removing and installing/replacing fastener for hard top at rear/side left or rig
BMW AG - TIS
12.02.2013 23:12
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -