3 Series E46 320Ci (M54) CONVER
61 35 160
Removing and installing or replacing rollover
sensor
Special tools required:
•
00 2 140
Warning:
Disconnect battery negative lead.
Remove rear seat backrest.
Release screws (1) and remove cover plate (2).
Release wiring harness holder (1) and disconnect associated
plug connection.
Release screws (2) with special tool 00 2 140 and remove
rollover sensor (3).
Replacement:
Carry out coding/programming.
RA Removing and installing or replacing rollover sensor
BMW AG - TIS
13.02.2013 00:28
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -